SPECIFICATION

​

Three-layer blanket made of polypropylene fabric, structuring film and metallized film

​

MEASUREMENTS

Rolls of 1.20 mx 8.33 m (10 m²); 1.20 mx 20.83 m (25 m²); 1.20 mx 41.67 m (50 m²); 1.20 mx 62.50 m (75 m²) and 1.20 mx 83.33 m (100 m²). Also available in 1 m width. It is also manufactured in lengths of 250 m, 500 m, 1000 m and 3000 m for the thermal tile industry with EPS and XPS.

​

UTILITY

Used for thermal insulation and leak blocker in pavilions, houses, kiosks. Applied on roofs and ceilings. Also used as a thermal cover for pallets and for laminating thermal tiles with styrofoam, glued above the XPS or EPS styrofoam.

​

Used to remove heat from the roof. Decreases around 6ºC with reference to 36ºC outdoors

​

APPLICATION

The thermal blanket is installed below the tile support batten or between battens. It can also be installed above the ceiling, fixed to the same structure as the PVC or wooden ceiling.

It cannot be installed glued or in direct contact with the tile, as it loses thermal efficiency due to the heat of contact with the tile. Ideally, the blanket should be at a minimum distance of 5 cm from the tile, but the further away from the tile, the better the insulation result.